Dust Particulate Monitor

Opacity Monitor

Approx Price: Rs 5 Lakh / No 
Minimum Order Quantity: 1 No
Dust Particulate minitoring systems
TECHNICAL SPECIFICATION Parameter CommentMeasuring Principle Dynamic Detection Principle, DDP (Scintillation)Operating Wavelength 510 – 540 nm (green LED)Measurement Reading Concentration (mg/m3)Measuring Range 0 – 1000 mg/m3 (user configurable)Path Length (duct diameter) 0.5 – 10 m (flange-to-flange separation)Accuracy + / - 2 %Flue gas flow rate ! 1.0 m/sResolution 0.1 mg/m3 (display resolution)Damping 1 – 60 s (user selectable)Drift with Temperature < +/- 0.5 %POWER AIR REQUIREMENTSVoltage +24 Vdc (optional 90-260 Vac PSU available)Nominal Current Consumption 400 mAPower Up Current Consumption 400 mAPurge Air Supply Volume 50 – 200 L/min (to each air purge body)Purge Air Quality Suitably filtered, oil free and dryINTERFACE OPTIONSSerial Comms ModBus RTU via RS485Internal USB (OI)External USB (RX)Analogue Outputs 4.0 – 20 mA (isolated and scalable)Relay Contacts 3 A @ 30 Vdc (signal level and service alarms)
PHYSICALAmbient Operating Temperature -20 – +55 °C (air temperature around the equipment)Exhaust Gas Temperature Up to +600 °C (heat insulating gaskets included)Ambient Operating Humidity 0 – 100 %Ingress Protection IP65 for external useMaterials 316 Stainless Steel (powder coated)Dimensions 153 x 120 x 122 mm (measuring head)Weight 2.5 kg per head

Dew Point Transmitter

Approx Price: Rs 65,000 / Piece 
Minimum Order Quantity: 1 Piece
Since our inception, we are instrumental in offering premium quality Dew Point Transmitter. This transmitter is designed as compact, simple and reliable instruments, which will continually monitor air dryer performance, compressed air quality and dry gas moisture, from ambient dew point levels to as low as -110ºC to 20ºC. Besides being manufactured from best-grade raw-material and advanced technology, the offered transmitter is inspected properly by our deft professionals. Owing to features like high efficiency and sturdiness, the offered transmitter is exceptionally valued by our precious clients. The offered transmitter is available with us in various sizes and other related specifications at affordable price.

Features:

  • Smooth performance
  • Precisely design
  • Long service life
Other Details:

  • Thin Film Capacitive Sensor Technology
  • Multiple Housing Configurations
  • Very Low Drift
  • Long Sensor Life
  • Robust Reliably Construction for Industrial Applications
  • Samples Pressure Upto 12 Kg/C2M
  • Inbuilt Thin film Capacitive sensor


Application:

  • Monitoring Control of Air Dryers
  • Plastic Dryers
  • Natural Gas Processing, Transportation Distribution
  • Glove Boxes
  • Welding Gases

 

Specification:

PrincipleThin Film Capacitive
RangeDegree C, PPM % RH
Resolution0.1 Unit or 1 Unit (Application based)
Sampling MethodDirect Plug In
DisplayAlphanumeric LCD
Power Source24VDC or 230VAC
Accuracy/2%
Response Time<5 Second
Data Storage5000 or 10000
Analog Output230VAC
Sensor Life2-3 Years
Operating Time6 – 8 hours
Environmental
Temperature15degree Celsius
Humidity< 85%RH
Atmosphere Pressure86- 106Kpa
HousingHigh Impact Plastic
Dimension in mm120 (W) X 125(H) X 1120(D)
Weight1.5 KG
WarrantyOne Year

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 100 per month
  • Delivery Time: 1-2 Week
  • Packaging Details: Normal packing with thermocol

Dust Particulate Monitor

Approx Price: Rs 1.75 Lakh / No 
Minimum Order Quantity: 1 No
We are instrumental in providing our clients a comprehensive range of Dust Particulate Monitor. The offered monitor is manufactured by our experts in compliance with industry quality standards. This monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Our provided monitor is manufactured using the advanced technology, innovative machines and the finest grade raw material. Moreover, the entire array is tested on various stringent parameters to ensure its durability and quality.

Features:

  • Compact design
  • Long service life
  • Low maintenance cost

Other Details:



  • Advanced detector for dust emissions and process flow applications
  • Easily selectable alarm threshold level and time delay
  • Two independent SPDT relay contacts for alarm indications with selectable fail-safe mode
  • Industrially hardened, noise resistant design; can operate on an ESP and other challenging applications
  • Suitable for all particulates - accurate sensing method
  • virtually maintenance-free - low cost of ownership
  • Suitable for virtually all dust collectors
  • Data Logger with RS232/485 and USB Computer Interface
  • Web based data Transfer through GSM/GPRS technology

 

Specification:
Range0-1000 Mg/M3
SensorBase Systems Style
Integral
Remote
Remote Sensor Enclosure:Cost Aluminum, Electrostatically powder coating
Probe Material:316 Stainless Steel (Slandered) other materials available
Insulator material:Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )
Electronics18 – 32 V DC () at the unit
230V AC (Controller)
Output:4-20mA & SPDT Relay
Probe Insertion length:3” to 36” ( 7.6 Cm to 91.4 Cm)
InstallationWeld the supplied fitting into the pipe or Duct and insert Sensor
Sensor MountingFlanged
½” Male NPT
Quick release

Additional Information:
  • Item Code: ATS105M
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 100 per month
  • Delivery Time: 1-2 Week
  • Packaging Details: Normal packing with thermocol

Continuous Emissions Monitoring Systems (SPM)

Approx Price: Rs 1.85 Lakh / No(s) 

Backed with leading–edge technology and experienced professionals, we are offering an extensive range of Continuous Emissions Monitoring Systems (SPM). It is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. Following industry distinct guidelines, we manufacture the entire array by utilizing contemporary machines, modernize technology and prime grade raw material. In order to ensure quality, the entire range is thoroughly tested upon a series of parameters. Apart from this, we offer the entire array in a wide range of specifications as per the precise needs of our clients.

Features:

  • Easy to use
  • Reliable operation
  • Precisely designed

 

Other Details:

  • A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity.
  • When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.
  • The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.

Specification :
Range0-1000 Mg/M3
SensorBase Systems Style
Integral
Remote
Remote Sensor Enclosure:Cost Aluminum, Electrostatically powder coating
Probe Material:316 Stainless Steel (Slandered) other materials available
Insulator material:Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )
Electronics18 – 32 V DC () at the unit
230V AC (Controller)
Output:4-20mA SPDT Relay
Probe Insertion length:3” to 36” ( 7.6 Cm to 91.4 Cm)
InstallationWeld the supplied fitting into the pipe or Duct and insert Sensor
Sensor MountingFlanged
½” Male NPT
Quick release

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 100 per month
  • Delivery Time: 1-2 Week
  • Packaging Details: Normal packing with thermocol

Broken Bag Detector

Approx Price: Rs 58,500 / Piece(s) 

A Dust particulate monitor is a device that is mounted in the discharge stack of a dust collector and continuously monitors the amount of particulate discharge. The particulate monitor uses a technology known as Triboelectric or Triboelectricity. When two different materials come in contact, it is likely that one will leave with more electrons than it started with and the other will leave with less, this is called Triboelectric Effect. The interaction between the probe and particles produces a charge transfer within the probe. The charge is then converted to an output signal.

The advanced electronics of the Monitor detect this signal and present it to the operator via a modulating Graphical display.

Specification :

Range 0-1000 Mg/M3

Sensor Base Systems Style

Integral

Remote

Remote Sensor Enclosure: Cost Aluminum, Electrostatically powder coating

Probe Material: 316 Stainless Steel (Slandered) other materials available

Insulator material: Extended High Performance (PFA) Temperature up to 250 C Ceramic (High temperature up to 550 Deg C )

Electronics 18 – 32 V DC () at the unit

230V AC (Controller)

Output: 4-20mA & SPDT Relay

Probe Insertion length: 3” to 36” ( 7.6 Cm to 91.4 Cm)

Installation Weld the supplied fitting into the pipe or Duct and insert Sensor

Sensor Mounting Flanged

½” Male NPT

Quick release

Dust Opacity Monitor

Approx Price: Rs 5.08 Lakh / No 
Minimum Order Quantity: 1 No
Double Pass Dust Monitor for monitoring dust emissions using DDP

FEATURES
• Innovative Dynamic Detection Principle (DDP) measurement technique
• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift
• Measurement reading as mg/m3 (when calibrated against standard reference measurements)
• Rugged 316 stainless steel construction
• Choice of interface options enabling easy integration
• Free utility software for PC based set-up, control and data logging
• Optional Operator Interface with different mounting configurations

BENEFITS
• Significantly less susceptible to drift than standard opacity monitors
• Better accuracy over shorter path lengths, i.e. smaller duct diameter
• Simple to install, commission and operate with an excellent reliability record
• Rugged design with no moving parts so low maintenance
• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulatedensity in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presented as a reading in mg/m³.

APPLICATIONS
• Cement works
• Steel plants
• Air filtration processes such as electrostatic precipitators
• Other industrial applications with larger particle size and relatively high dust loading

Additional Information:
  • Item Code: DSL340
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 10
  • Delivery Time: 4-5 week
  • Packaging Details: Special Packing

Handheld Dust Monitor

Approx Price: Rs 1.28 Lakh / Piece 
Minimum Order Quantity: 1 Piece

We have gained a remarkable position in the industry by offering a qualitative assortment of Handheld Dust Monitor that is used to monitor the suspended Particulate concentration in the air. The offered monitor is manufactured employing high-end technology and well-tested components in observance to industry defined guidelines. Apart from this, the entire range is scrupulously tested under the strict inspection of our quality controllers. This range can be availed from us in various specifications at market leading prices.

Features:

•Long service life
•Precisely design
•Require less maintenance
Other Details:

•Sampling dust and particulate matter is important as dust and particulate matter can affect the health of humans, as well as the natural environment.
•Dust and particulate matter can cause respiratory problems when breathed in by humans. Dust and particulates above 10 micrometer (PM10) are filtered and generally do not enter the lungs.
•Dust and particulate matter that is smaller than 10 micrometers (PM10, PM2.5, PM1.0) can enter into the Alveoli where gas exchange occurs.
•This PM2.5 is more dangerous as it can affect the exchange of gases within the lungs and even penetrate the lung into the blood stream and cause other health issues.
•PM10 , PM2.5 and PM1.0 are the normal sampling standards found throughout the world, they represent the particulate pollution that effects human health and thus sampling them provides an accurate insight into how dust and particulate matter effect human health.
•Handheld/Portable PM Monitor is used to monitor the suspended Particulate concentration in the air with measuring range 0.001mg/M3 to 10 mg/M3.
•It adopts optical scattering technique. This type of Product has many advantages, such as fast detection speed, high accuracy, light and small, easy operation, measuring and displaying of 3 channels at the same time.
•It adopts the method of automatic measurement, improving the work efficiency effectively.

 

Specification :

Measuring principle Optical scattering technology

Light Source Laser Diode

Detection Range 0.001 – 10mg/m3

Display LCD

Size Channel PM10, PM2.5, PM1.0

Flow Rate 2.83L/min (Imported Pump)

Sample Time 0-9999s Selectable

Zero Count

Printer External thermal printer

Data Storage 1000

Operating Time 5 hours

Outside Dim 130*220*45(Wide*High*Deep)

Weight 0.6kg

Temperature 15degree Celsius

Humidity

Atmosphere Pressure 86-106Kpa


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 100 per month
  • Delivery Time: 1-2 Week
  • Packaging Details: Normal Packing with thermocol

Dust Monitoring Systems

Approx Price: Rs 5.08 Lakh / No 
Minimum Order Quantity: 1 No

Double Pass Dust Monitor for monitoring dust emissions using DDP.

FEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurationsBENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenanceTHE TECHNOLOGYThe DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaustgas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measuresfluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presentedas a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 10
  • Delivery Time: 3-4 Week
  • Packaging Details: Special Packing

Dust Particulate Monitor

Approx Price: Rs 5.08 Lakh / No 
Minimum Order Quantity: 1 No

Double Pass Dust Monitor for monitoring dust emissions using DDP.

FEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurations BENEFITS• Significantly less susceptible to drift than standard opacity monitors , Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presented as a reading in mg/m³.APPLICATIONS• Cement works• Steel plants• Air filtration processes such as electrostatic precipitators • Other industrial applications with larger particle size and relatively high dust loading


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 10
  • Delivery Time: 3-4 Week
  • Packaging Details: Special Packing

Opacity Monitor

Approx Price: Rs 5.08 Lakh / Number 
Minimum Order Quantity: 1 Number

Double Pass Dust Monitor for monitoring dust emissions using DDP.
FEATURES

• Innovative Dynamic Detection Principle (DDP) measurement technique

• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift

• Measurement reading as mg/m3 (when calibrated against standard reference measurements)

• Rugged 316 stainless steel construction

•Choice of interface options enabling easy integration

• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurations

BENEFITS

• Significantly less susceptible to drift than standard opacity monitors

• Better accuracy over shorter path lengths, i.e. smaller duct diameter

•Simple to install, commission and operate with an excellent reliability record

• Rugged design with no moving parts so low maintenance

• Latched head and lid design to enable ease of access for installation and maintenance

THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presentedas a reading in mg/m³APPLICATIONS• Cement works,Steel plants, Air filtration processes such as electrostatic precipitators

• Other industrial applications with larger particle size and relatively high dust loading.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 10
  • Delivery Time: 3-4 Week
  • Packaging Details: Special Packing

Stack Emissions Monitoring Systems

Approx Price: Rs 5.08 Lakh / Number 
Minimum Order Quantity: 1 Number

Double Pass Dust Monitor for monitoring dust emissions using DDP

FEATURES• Innovative Dynamic Detection Principle (DDP) measurement technique• Immune to gradual reductions in absolute intensity of the light signal soless susceptible to drift• Measurement reading as mg/m3 (when calibrated against standard reference measurements)• Rugged 316 stainless steel construction• Choice of interface options enabling easy integration• Free utility software for PC based set-up, control and data logging• Optional Operator Interface with different mounting configurations BENEFITS• Significantly less susceptible to drift than standard opacity monitors• Better accuracy over shorter path lengths, i.e. smaller duct diameter• Simple to install, commission and operate with an excellent reliability record• Rugged design with no moving parts so low maintenance• Latched head and lid design to enable ease of access for installation and maintenance THE TECHNOLOGY The DSL-340 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in exhaust gas passing through a duct, stack or flue. The DSL-340 uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver / Reflector arrangement. Increased dust or particulate density in the stack causes the amplitude of these fluctuations to increase. When calibrated against standard reference measurements, the amplitude of this signal relates directly to the dust concentration in the stack and this can be presente das a reading in mg/m³.APPLICATIONS, Cement works• Steel plants, Air filtration processes such as electrostatic precipitators• Other industrial applications with larger particle size and relatively high dust loading.


Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Mumbai
  • Production Capacity: 10
  • Delivery Time: 3-4 Week
  • Packaging Details: Special Packing
Looking for Dust Particulate Monitor ?
© Applied Techno Systems
 
Desktop Site Back to top